(China) YY-6010 DIN Abrasion Tester

I. Gabatarwas:

Na'urar gwaji mai juriya za ta gwada yanki na gwajin da aka gyara a cikin wurin zama na gwaji, ta wurin wurin gwajin don gwada tafin don ƙara wani matsa lamba a cikin jujjuyawar injin gwajin da aka rufe da yashi mai jurewa abin nadi nadi gogayya gaba motsi, wani nisa, auna nauyi na gwajin kafin da kuma bayan gogayya.

Dangane da ƙayyadaddun nauyi na yanki na gwaji na tafin hannu da daidaitattun daidaito na daidaitaccen roba, ana ƙididdige girman girman girman girman juzu'in gwajin tafin hannu, kuma ana amfani da asarar ƙarancin juzu'i na yanki don tantance juriyar lalacewa na yanki.

II.Babban Ayyuka:

Wannan injin ya dace da kayan roba, roba, taya, bel mai ɗaukar nauyi, bel ɗin tuki, tafin kafa, fata mai laushi mai laushi, fata ...

Don gwajin lalacewa da lalacewa na wasu kayan, an zazzage samfurin mai diamita na 16mm daga kayan kuma an sanya shi a kan injin gwajin lalacewa don ƙididdige yawan asarar gwajin kafin a nika. An ƙididdige juriyar lalacewa na yanki na gwaji ta yawan adadin gwajin.

III. Matsayin Haɗuwa:

GB/T20991-2007, DIN 53516, ISO 4649, ISO 20871, ASTM D5963,

ISO EN20344-2011SATRA TM174 GB/T9867

IV.Halayen:

※ The jiki surface jiyya: da Amurka dupont foda, electrostatic zanen tsari, da curing zafin jiki 200 ℃ don tabbatar da dogon ba Fade.

※ Madaidaicin mirgina mai ladabi, gyarawar biaxial, jujjuya su lafiya ba tare da duka ba;

※ Madaidaicin injin motsa jiki, aiki mai santsi, ƙaramin ƙara;

※ Tare da kirgawa, ƙimar gwajin aikin dakatarwa ta atomatik na iya tsayawa gwaji ta atomatik;

※Babu buƙatar sake saita maɓallin, dawo da sake saiti ta atomatik;

※ Babban madaidaicin bearings, kwanciyar hankali na juyawa, tsawon rai;

※ Mechanical sassa da lalata na aluminum da bakin karfe tsarin abu abun da ke ciki;

※ Gwaji tare da maɓalli ɗaya, maɓallin ƙarfe na hana ruwa kariya, aiki mai sauƙi da dacewa;

※ Matsakaicin madaidaicin shigarwa ta atomatik, ƙwaƙwalwar ƙarfin nunin dijital;

※ Tsaftace aikin tara ƙura ta atomatik, manyan ayyuka vacuuming, ba tare da manual to kura;

V.Ma'auni na Fasaha:

1. Jimlar tsawon abin nadi: 460mm.

2. Samfurin samfurin: 2.5N ± 0.2N, 5N ± 0.2N, 10N ± 0.2N.

3. Takarda: VSM-KK511X-P60

4. Girman takarda: 410 * 474mm

5. Matsala: 0-9999 sau

6. Gudun gwaji: 40 ± 1r / min

7. Girman samfurin: Φ16 ± 0.2mm kauri 6-14mm

8. Dip Angle: 3 ° samfurin baya axis da a tsaye nadi surface Angle,

9. Maɓallin maɓallin: maɓallin nau'in LED na ƙarfe.

10. Yanayin sawa: hanyoyin da ba rotary/rotary ba

11. Tafiya mai inganci: 40m.

12. Wutar lantarki: AC220V, 10A.

13. Girma: 80*40*35cm.

14. Nauyi: 61kg.

VI.Jerin daidaitawa

1. Babban Inji --1 saiti
2. Samfurin Cutter - 1 inji mai kwakwalwa
3. Daidaitaccen manne-- 3 capsules
4. Vacuum Cleaner-- Saiti 1
5. Calibrated aluminum ingot - 1pcs
6. Sandpaper - 1 inji mai kwakwalwa
7. Igiyar wutar lantarki - 1 inji mai kwakwalwa
8. Ana buƙatar siyan wannan injin don amfani tare da ƙaramin ƙasan rawar soja da ma'auni mai yawa (Hotunan Magana)