(China) YY-4065C Pendulus Rebound Instrument
Takaitaccen Bayani:
Igabatarwas:
Rubber tasiri na'ura na gwajin na'ura don makamashi 0.5J pendulum nau'in nau'in nau'in nau'in nau'in nau'in ƙwayar cuta, wanda ya dace da ƙaddarar taurin tsakanin 30IRHD ~ 85IRHD vulcanized roba
Ƙimar sake dawowa na manne.
A cikin layi tare da GB/T1681 "ƙaddamar da ƙayyadaddun juriya na roba" da ISO 4662 da sauran ka'idoji.
Injin yana ɗaukar iko da allon taɓawa, babban madaidaicin iko, ana iya buga bayanan da aka auna ta micro printer.
Ma'aunin Fasaha:
| Abu | Neman Fasaha |
| Punch diamita | 12.45 ~ 15mm |
| Gwaji kauri | 12.5 ± 0.5mm |
| Girman Misali | φ29mm × 12.5mm |
| Yawan tasiri | 0.34-0.35 kg |
| Gudun tasiri | 1.4 ~ 2.0 m/s |
| Ƙungiya Tasiri | 90° |
| Girma | 550mm × 180mmx 470mm |
| Ƙarfi | AC220V 60Hz 50W
|
YY-4065C Pendulus Rebound InstrumentBidiyon Aiki
开始试验--Haɗa wutar lantarki kuma kunna wutar lantarki a bayan injin
先调节水平--Da farko daidaita matakin injin
将水平泡调节到中间范围-- Daidaita kumfa a kwance zuwa tsakiyar kewayo
摆动冲击杆--Swinging tasiri sanda
使他呈现自由垂直状态--Yi sandar tasiri a cikin yanayin tsaye na kyauta
按Sake saitin键--Danna”Sake saitin”
先把夹具松开---Sake da kayan aiki tukuna
放入试样--- Sanya samfurori a cikin kayan aiki
夹具夹紧--- Yi Matsa Matsala
这个可以旋转，用于微调夹具松紧程度--- Ana iya jujjuya wannan don daidaita madaidaicin madaidaicin
这个可以把夹具夹紧--Wannan zai riƙe jig tare
按Sake saitin键--Danna"Sake saitin”
将冲击杆挂起--- Rataya sandar tasiri
这两个指示灯都是绿色时---Lokacin da duka fitilu suna kore
按TAsiri键，释放冲击杆--- Danna”TAsiri”, Saki sanda, gama gwajin lokaci ɗaya.
